Metal Roofing Screws

Flovent™ Metal Roofing Ridge Vent

• Fits many profiles
• Increases the longevity of metal roofing
• Contractor friendly
• Easy installation with adhesive strip
• Can be installed on the ridge cap or on the roof
• Fire retardant & UV stable
• Patent pending

Height	Width	Length	Pcs/Bx	Lb/Roll
1-1/2" For 7/8" or lower rib heights	2"	10'	10	9
1-3/4" For 1" - 1-1/4" rib heights	2"	10'	10	10

Technical Specs:

• Net free area: 8.5 sq. in. per lineal ft. per slope 17 sq. in. per lineal ft. per ridge
• Air Permeability: 760 Cubic Feet Per Minute
• Snow Infiltration: 0
• Cold Crack: -55˚ C Degrees
• Tear Strength: 3.5 PSI
• Tensile Strength: 16 PSI Elongation 175%
• 100 MPH Wind Driven Rain: No Leakage
• FL Building Code Product Approval #FL 4640-R1